Why angled nailer

The angled nailers are MUCH more convenient when running trim. The straight nailers get in the way of every process on trin work The end of a straight nailer will also limit the options you can shoot from when doors are close to walls and can't fully open because they hit the door.

When running crown again one is limited at the angle you can shoot nails because the straight nailer hits the wall at it's end When using nailers on baseboard, angled nailers make nailing the inside corners of rooms much easier and allow for shooting the nail downward into the 2x4 wall floor plate without the required horizontal positioning and angling of the nailer head of straight nailers which in most cases leave the nail head to close to the surface or even above it.

I've used both nailer types for years and use them every day The ONLY benefit for using straight nailers is that the nails are generally less expensive because many more generic nail manufacturers can make them and with less manufacturing cost which trickles down to us the consumer. Guess that depends on the brand then. My angle nailer uses 15 guage nails and usually winds up splitting the wood. My straight nailers use 16 guage and tends not to split wood. As such, the tool is ideal for heavy construction work such as cabinet making, which requires large nails such as the gauge size.

They can only hammer in thinner nails that are 16 gauge and above, which makes them ideal for light construction work. This includes nailing picture frames and installing panels. Angled nailers also have the advantage of being lighter than straight nailers because less material is used to build them triangle vs. Combined with their compact design, this makes them easily portable and easier to handle.

On top of that, it requires thick, heavy-duty nails that are difficult to find and are more expensive. This is their only disadvantage and therefore, if you are on a tight budget, a straight finish nailer is the best option. The straight Paslode IM65 is compatible with the following nail and fuel packs. The IM65A angled nailer, is virtually identical to the straight machine, except the magazine is offset by 20 degrees.

It takes the same gauge wire nails, but they too are also set at a degree angle. Being able to tilt the front of the machine backwards prevents the front of the tool from hitting the workpiece, so it allows nails to be fired into tight corners or close to the floor. This would be impossible if you were using a straight nailer, and it is in these applications where an angled nailer is invaluable. The angled Paslode IM65A is compatible with the following nail and fuel packs.

If the nature of your work means you regularly find yourself having to fix into corners and tight spaces, then it is worth considering the angled 2 nd fix nailer over the straight machine. If this is a rare occurrence, or you simply think you can get by on these occasions, buy the straight nailer and save money on the nails. Des Duddy — Joint Managing Director. Shop now. Pay in 3 interest-free instalments with Klarna.

Discover More. Get access to exclusive trade prices and much more by applying today. Blog Blog What is the difference between a straight and angled nailer? What is the difference between a straight and angled nailer? The only two types that come in both straight and angled versions, which are finishing nailers and framing nailers. Just a quick recap, finishing nailers are used when installing things like baseboards or crown molding. They use headless nails and are sunk all the way into the wood so there are no nail-heads sticking up on a finished surface.

While framing nailers are used in larger projects, like building a deck or framing a house. Framing nailers are usually considered to be the most heavy duty nailing gun available.

Obviously, the shape is the main difference.